1970s Antique and Rusty Gas Heater Restoration

1970s Antique and Rusty Gas Heater Restoration



  • Heater? Are you sure? It looks more like a Soviet TV set from the 50s.

    Forever JungForever Jung6 aylar önce
  • HAve vey old restoration

    Stachy CatabasStachy Catabas7 aylar önce
  • IMPORTANT MESSAGE: When fitting gas pipes, ALWAYS use sealing paste or thread sealant.Otherwise you will get a leak, and explosion.

    Martin HoultonMartin Houlton8 aylar önce
  • what doesn't kill you makes you stronger...except space heaters...a space heater will kill you...this would make a good bluetooth speaker inclosure

    Imp ThePimpImp ThePimp9 aylar önce
  • Does nobody use primer anymore etching primer at that

    Michael BeatyMichael Beaty9 aylar önce
  • good channel! i'm iscript into your channel!

    ArmonyJazzStudioArmonyJazzStudio10 aylar önce
  • You did it again I think 🤔 you did a great 👍🏽 job

    Victoria MilsonVictoria Milson10 aylar önce
  • приобрети песко струй

    Sergey StepanovSergey Stepanov10 aylar önce
  • What the hell is that? It looks before and after similar bad.

    Falko MöwesFalko Möwes10 aylar önce
  • احسنت يا بطل

    zozoart 12zozoart 1211 aylar önce
  • ابداع في ابداع عاشت الايادي

    zozoart 12zozoart 1211 aylar önce
  • 👍👌عندي وحده تقريبآ تشبه قديمه ومتروكه يا ريتك لو قريب

    Basima Al jboryBasima Al jbory11 aylar önce
  • Paint job is awful... the heater looks like it’s just been whipped down with a rag & cleaned, still looks no better than when it was a pile of rust

    hammatime71hammatime7111 aylar önce
  • Lousy job. Get some proper tools. You should try doing something else on your channel like finger painting or eating play doh

    CC11 aylar önce
  • you got a good eye for cool shit nice work!!!

    Brent millerBrent miller11 aylar önce
  • That was like painting a out house.

    Tim RolandTim Roland11 aylar önce
  • Not exactly thrilled that you think something from the 70s is an antique seeing as I was born in the 60s but thank you for sharing. Be safe and be lucky.

    wols wildcampingwols wildcamping11 aylar önce
  • nice restoration job

    Bryan BeeverBryan Beever11 aylar önce
  • Very beautiful work

    Omar AzzOmar AzzYıl önce
  • Excellent job!!! I remember those heaters! Someone will be very grateful for it's warmth.

    Anniefanny CharlesAnniefanny CharlesYıl önce
    • What was this yellow liquid?

      numkulaosha numkananumkulaosha numkanaYıl önce
  • Nice one broo

    Jazz BarbersJazz BarbersYıl önce
  • Not used teflon tape for gas leakage safty. Not applied primer in steal surface.

    Gururaj ArkasaliGururaj ArkasaliYıl önce
    • Also no fire-proof paint.

      MrWolfSnackMrWolfSnack10 aylar önce
  • woow good job bro

  • nice pliers!

    gar ogar oYıl önce
  • Dış saçındaki darbeli ezik olan kısımlar düzeltilse daha iyi olurdu.

    Ahmet kuzuAhmet kuzuYıl önce
  • q bosta

    Rodrigo SilvaRodrigo SilvaYıl önce
  • That's called a hwater, and 1970s is not antique. Take this down. This is garbage..

    Jon HandelJon HandelYıl önce
    • And so are you. Stay off this site.

      Anniefanny CharlesAnniefanny CharlesYıl önce
  • Soda blasting..........

    josh robinsonjosh robinsonYıl önce
  • All in all, not a great restoration. It could have been better with primer, smoothing the material, taking out dents, propper spraying technique, putty on the threads for gas line, checking for leaks. My opinion only, of course.

    Spanky McBeanSpanky McBeanYıl önce
  • FANTASTIC, Very talented man 👍

    TO NOTO NOYıl önce
  • Beautiful

    Christine DavisChristine DavisYıl önce
  • My old flat had one of these things about twenty years ago. The heat they produce is tremendous!

    Morris McKinnonMorris McKinnonYıl önce
    • dodo io

      dodo Nemetzdodo Nemetz2 aylar önce
  • I hope none of the yellow chemicals goes straight down the drain, it looks pretty potent.

    Dale DDale DYıl önce
  • ya i know some one that has that and it still running

    blackgriffinxxblackgriffinxxYıl önce
  • It would have been nice to see the dents fixed and some etching primer prior to paint. Also to make sure paint was heat resistant!!

    C5V2HunterC5V2HunterYıl önce
  • CABOOM !!! , what was that

    Anne6621Anne6621Yıl önce
  • OMG, you have made a potential death trap. 7.12 that was not proper heat resistant putty. 9.00, countersunk screws in the handle? NO, PTFE Tape. No checks for Potential gas leaks, which is paramount when repairing gas appliances. Did you use heat resistant paint? Normal spray paint is useless for items that get hot. No check for CO2. THIS HEATER IS DANGEROUS, AN, SHOULD NEVER BE USED, WITHOUT PROPER SAFETY CHECKS.

    TheJR1948TheJR1948Yıl önce
  • Stil no primer.

    Edgar MatzingerEdgar MatzingerYıl önce
  • That is so dangerous. Glad it's not goi ng in my house

    FurioFurioYıl önce
  • I hope that won't be used 😳

    FurioFurioYıl önce
  • That's a heater not a stove

    FurioFurioYıl önce
  • Great job, shame about some of the dents you did not knock out !!!

    Brian HintonBrian HintonYıl önce
  • Surprised you didn't try to take the dents out

    Cindi BergCindi BergYıl önce
  • The manual wire brushing part was painful to watch

    ****Yıl önce
  • You need to pick up some tips on spraying paint from cans and you should always use an etch primer on bare metal. I would not use that heater without first checking properly for leaks

    Optical TraceOptical TraceYıl önce
    • He's only doing this to copy repair videos on youtube, he isn't fixing them properly and is doing a very substandard job. It was clear when he doesn't know how to spraypaint and puts an entire layer on in one coat. Just making these videos for clicks and views. Also he didn't use non-flammable paint either. Assuming it doesn't blow up or kill the owner from a gas leak, that paint will combust and ignite.

      MrWolfSnackMrWolfSnack10 aylar önce
  • U dont have expensive tools but u did great job... Hi from TURKEY 🇹🇷

    Gökhan GelmezGökhan GelmezYıl önce
    • Gokhan Gelmez. it is Not a great job. He has made a potential death trap. He made no basic safety checks. This heater could kill someone. It is not about good tools. It is about safety. A little knowledge is a dangerous thing, as this video proves.

      TheJR1948TheJR1948Yıl önce
  • Ces plaques blanches c'est de l'amiante !?

    wiels williamwiels williamYıl önce
  • You do not show if you tested the piping for leaks. If you didn't do this, it's terribly dangerous!

    RobertoDonattiRobertoDonattiYıl önce
  • I wish you had used a hammer to flatten out the bent metal parts

    J-Four SchuttJ-Four SchuttYıl önce
    • TheJR1948 CO2 😂 um ok

      Manuel A.Manuel A.7 aylar önce
    • @J-Four Schutt because he obviously doesnt give a good shit what you think.

      Anniefanny CharlesAnniefanny CharlesYıl önce
    • @TheJR1948 I've told him before and he just ignores the comments I forgot he doesn't read comments when I posted this

      J-Four SchuttJ-Four SchuttYıl önce
    • J-Four Schutt. Your only concern is he did not straighten the bent metal. Does it NOT concern you that he made NO checks for Gas Leaks, He made NO checks for CO2. Does it not bother you that this is potentially a DEATH TRAP? You need to sort your priorities out.

      TheJR1948TheJR1948Yıl önce
  • That's no antique just simple old!

    viktor hubaiviktor hubaiYıl önce
  • Looks great!! You did great work, and I hope it lasts another 40 years. You've been getting better every video you post. Maybe you can donate your items that you restore to a needy charity or school?

    Aaron BAaron BYıl önce
  • 🌷🌷🌷🌷🌷🌷🌷🌷🌹🌹🌺🌺🌺🌹🌹🌷🌷🌷🌷🌹🌺🌺🌺🌹🌹🌷🌷🌹🌹🌺🌺💐🌼🌼🌻🌻🌻🌼🌼🌼💐🌼🌼🌻🌼💐💐💐🌼🌼🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🙏🙏🙏💋💋💋💋💋💋💋💋💝💝💝💝💝💝💝💝💝❤❤❤❤❤❤❤❤💕💕💕💕💕💕💕💖💖💖💖💖💖💖💖💖👄👄👄👄👄🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩😍😍😍😍😍😍😍😍😍😍

    علي كلاشنكوفعلي كلاشنكوفYıl önce
  • With tools you have, you do a really good job 👏, keep going i am your fan😊👍👍👍

    TysyTube RestorationTysyTube RestorationYıl önce
    • Mee too brother 👍👍

      Sheikh AamirSheikh Aamir11 aylar önce
    • FFS. This is a Death Trap. No checks for Gas leaks, No PTFE tape to seal connections. If anyone with even less knowledge than you or Mr Tool tries this they could DIE. Either from a Gas explosion ( no check for leaks). Or from CO2 Poisoning.. That is a nice way to DIE. you and your family just fall asleep and never wake up. This is not about tools this is about safety, he may not have the best tools. But, that is not an excuse for doing the job safely. If the heater had been used for any length of time a leak would leave a build up of gas inside the cabinet. Then BOOM and a room full of dead people. Likewise with CO2, a build up of CO2 is also a killer. AKA, the SILENT KILLER. When working with Gas, safety is Paramount you CANNOT Take chances.

      TheJR1948TheJR1948Yıl önce

      Brayden HBrayden HYıl önce
    • en iyisi sensin tystube :) keşke hepsi senin gibi işini güzel yapsa

      Ferhat ŞahinFerhat ŞahinYıl önce
    • hi bro, i think the same -> less tools = more hardwork edit: don't saw your last video on helmet, i go to it just after ;p

      Thomas K.Thomas K.Yıl önce
  • it is not antique i have this kind of heater in my house

    Ahmad AliAhmad AliYıl önce
  • 1970s, it's not so antique!!!! 😭😭😭😭😭 Any way good job.

    Davide DomenichiniDavide DomenichiniYıl önce
    • for example, nokia 3310 is an antique cellphone, just 1990 ;p

      Thomas K.Thomas K.Yıl önce
1970s Antique and Rusty Gas Heater Restoration