Restoration rusty old air compressor | Restore vintage air compressor

Restoration rusty old air compressor | Restore vintage air compressor
Our next project is to restore an old air compressor. The air compressor we bought at the second hand shop. It still works quite well, but its parts have been rusted a lot. We are not specialists in machinery restoration , so there are not enough tools for the job. But with all our strength we try to improve in the best way. I am happy to receive your feedback, advice, suggestions to improve yourself. I am very sorry that there are unwanted mistakes in the video .
Thank you for watching the video and for us to suggest
Don't forget to subscribe our channel:
trvision.net/pass/UC-XkN8tyM05QeQ_oTtSWBsA
#aircomressor
#Restoration
#airpump

Herunterladen

YORUMLAR

  • Just wondering about how safe the tank is; it sure looks rusty! I understand you can get them water pressure tested?

    Marty SchlosserMarty SchlosserGün önce
  • k

    1337fraggzb00N1337fraggzb00N3 gün önce
  • Well 24+ minutes of my time I will never get back. You should have done a simple hydrostatic pressure test (since you were not going to send it out to be certified) The Tank clearly had rust issues and is potentially dangerous. The breakdown and cleaning was okay, you might consider wearing gloves when using a strong solvent as your hands will absorb the chemicals. New rings were good, not sure how cylinder walls were - a true rebuild would have honed them. The painting was just awful. Most metal requires a prime coat then a top coat. Spray painting would have been nicer after plugging all the ports. The belt guard did not look well preped for paint either. New belt I hope. The electrical hook up looked to be under gauge for the size of the motor as well. Risky pressurizing this tank not knowing if it can handle the psi. On an aside, you may want to mask off where you spray paint (the belt guard) and since you had the grinder/sander out, you might as well have cleaned up the Stanley vise rust. You have potential, keep working at it.

    William NicklausWilliam Nicklaus5 gün önce
    • Thank for your comments . We will improve our working skills

      Restoration RestoreRestoration Restore3 gün önce
  • From terrible to bad. 👎

    Amador GutierrezAmador Gutierrez5 gün önce
  • Indian work loool

    عقيل رحمنعقيل رحمن5 gün önce
  • Yours work is not right

    Murthy MurthyMurthy Murthy5 gün önce
  • Nice job.

    Rodney WardRodney Ward8 gün önce
  • no product name ,no blades name .nothing . fucking gay

    zog notyzog noty8 gün önce
    • @Restoration Restore np

      zog notyzog noty7 gün önce
    • Thank for your comments

      Restoration RestoreRestoration Restore8 gün önce
  • КОЕ-КАК ПОЧИСТИЛ, КОЕ-КАК ПОКРАСИЛ....... НАЗЫВАЕТСЯ РЕСТАВРАЦИЯ....

    Олег АлександровичОлег Александрович8 gün önce
  • all are great but the painting sucks! whats wrong with you huh!?

    Criss CrossCriss Cross8 gün önce
  • Una chapuza

    GT MOTORGT MOTOR10 gün önce
  • Te doy like por que te esforzaste

    the brothersthe brothers11 gün önce
  • Super sir

    skasif Asif786skasif Asif78611 gün önce
  • ピストンの芯だしをしてないのでは?

    Tube YouTube You11 gün önce
    • Thank for your comments

      Restoration RestoreRestoration Restore11 gün önce
  • Wer da noch meckert hat keine Ahnung.Klasse!

    Peter GninuelPeter Gninuel13 gün önce
  • Did yu do anything to treat the inside of the tank?

    Robert DakeRobert Dake16 gün önce
  • Stava meglio prima

    maicol martinamaicol martina16 gün önce
  • you should have put tidied up old compressor not restore i thought it was blue to restore it it should look like it just came out of the factory and your painting is not too good you may as well just throw a pot of paint at it take a look at rescue restore get a few tips

    keith florykeith flory20 gün önce
  • Ło panie jaki klamota.

    Jok3R RJok3R R21 gün önce
  • bravo!!! mon gar

    Koffi Atsu SegborKoffi Atsu Segbor21 gün önce
  • U put all that effort into paint prep. And u slap it on with a brush. Fuk that hurt watching

    Aiden PurdieAiden Purdie21 gün önce
  • LOL he paint the tube with roller

    Farid ArsitekFarid Arsitek21 gün önce
    • Thank you

      Restoration RestoreRestoration Restore21 gün önce
  • when you have now separated it all, why not do it really nice, get all the old paint off

    morten kristensenmorten kristensen22 gün önce
  • 잘했어요🇰🇷👄👍콤푸레이샤👏😂😆😆

    ᆞᆞᆞᆞ24 gün önce
    • Thank you

      Restoration RestoreRestoration Restore24 gün önce
  • Việt Nam 🇻🇳 tao làm đấy

    Thanh NguyễnThanh Nguyễn24 gün önce
  • How fortunate you found a tank that was intact and no holes

    Marcos RestoMarcos Resto25 gün önce
  • Такое ощущение, что для таких видео специально ставят рабочие агрегаты на несколько месяцев в сырое помещение, чтобы потом "реставрировать" видно же что коррозия поверхностная.

    Виктор СтариковВиктор Стариков26 gün önce
  • Saludos cordiales ing Felipe, espetacular tu mantenimiento del equipo de aires comprimido. Saludos

    Felipe Amílcar estasuneFelipe Amílcar estasune26 gün önce
  • U suck

    Surya PerkasaSurya Perkasa26 gün önce
  • Hi

    Mr-ElectricityMr-Electricity26 gün önce
  • Do you sit them in vinegar or just spray them down with acid before these "restoration" vidoes? because rust doesn't get that bad without severe rust pitting yet nothing out of the 20+ videos of yours I've seen needed more than a good scrub.

    Jon StarkJon Stark26 gün önce
    • Thank for your comments

      Restoration RestoreRestoration Restore26 gün önce
  • Many people forget what kind of stored energy you're dealing with in a pressure vessel like that. Exploding air tanks are no joke. You could end up dead or wish you were. The rusty water you were draining out means the metal inside the tank, especially near the welds, is damaged. The tank can and will explosively rupture. I wouldn't pressurize that tank without a blast cage or something solid surrounding it. Be careful out there.

    David HatzenbuhlerDavid Hatzenbuhler29 gün önce
    • David Hatzenbuhler the water wasn’t particularly rusty and the amount of it was significantly above normal amounts for that tank size. My guess is they just added a bunch of water maybe with a hint of acid which although it would produce the rust coloured water it would actually clean the inside of the tank and a simple rinse out would have cleaned it up and the structural integrity would remain unaffected.

      Jon StarkJon Stark26 gün önce
    • @Jon Stark The rusty water being drained from the tank is what I was referencing. Whether he put salt in the tank or not it's crazy to pressurize a tank once it's proven to have rust inside.

      David HatzenbuhlerDavid Hatzenbuhler26 gün önce
    • Rust was artificially introduced, my guess is acid or a salt bath and then left in the sun.

      Jon StarkJon Stark26 gün önce
  • Bad

    Sats KinSats KinAylar önce
  • Хуета из хуеты, дизлайк

    Vitaliy KuryshevVitaliy KuryshevAylar önce
  • I think, having committed the work to strip, I would have replaced bearings, belt, gaskets, and hoses. Also, I would have found a way to strip and repaint beneath those welded brackets on the tank. Overall, it seems a lot of effort to do half a job.

    Mick LivelyMick LivelyAylar önce
    • Yes, I take your point. But is that the question? If, for the price of those parts, you create a "good as new" reliable compressor, for much less than the price of a new one, then it's worthwhile?

      Mick LivelyMick Lively28 gün önce
    • The parts will cost more than the compressor.

      mans410mans41029 gün önce
  • Inició muy bien pero la cagó pintando con brocha, mejor le hubiera aplicado pintura con pistola o en spray, la cagó al final weon.

    JHON JAIRO HIDALGO ARTEAGAJHON JAIRO HIDALGO ARTEAGAAylar önce
  • 動画のテンポもいいし仕事も丁寧でGOODです。

    山根浩生山根浩生Aylar önce
  • Exactly how many people died when this compressor finally exploded?

    VE3CWQVE3CWQAylar önce
  • I love resto4ation videos but God it pisses me off when I see people ruin things just to make a video. This was staged. A shame. A fake. This was a fine working machine then they used something to weather it. All the cables are perfect. Even the connections. All the nuts and bolts are almost new where ever was incased by a nut or thread. The connections to the pressure solenoid are shinny bright copper.. And not to mention the missing and rusted tank. You buggers are getting damn lazy. You can early see when he turns the thing upside down how what ever they used to ages it ran down the sides and just settled and dropped off the bottom and didn't effect the belly. I know it wasn't a brand new machine but it wasn't anywhere near as old and beat up as they make out. Why almost ruin something so you can put up a restoration video. I will was a rebuild video just the same So do a rebuild video not a restoration video. Bloody liars and scammers piss me right off.

    Jack Of All Trades Master Of NoneJack Of All Trades Master Of NoneAylar önce
  • You have a shitty way of restoring. Painting over is not restoring. Also you painted shut the release valve you moronic assbrain.

    Jako PlaysJako PlaysAylar önce
  • Do you sell your overhauls or keep them? I’d have a tough time letting them go

    DrewManiaDrewManiaAylar önce
  • No gloves? Savage. Thanks for giving us some quality entertainment. Very satisfying to watch.

    DrewManiaDrewManiaAylar önce
  • Мне одному неприятно смотреть?

    видео игрывидео игрыAylar önce
  • A buddy of mine is moving to FLA and leaving an old one 4x5 times that size in the garage, Some one will be lucky. Some people need to go out, buy their own junk, take it home and make videos while restoring so people will watch and bitch about it. Find something else to do with your time.

    alwaysopenalwaysopenAylar önce
  • Shitty ass restoration job

    mike rumrillmike rumrillAylar önce
  • Фоновые звуки повеселили на ускоренном режиме)))

    Вячеслав КлоковВячеслав КлоковAylar önce
  • great video. I just swapped tanks for my air compressor.

    arthur mulkeyarthur mulkeyAylar önce
  • The work you did is similar to what is done by those who go to your house. you pay a fortune, they do it in a hurry, and it is left with a bungling finish. What time have I lost watching this video

    Raeburn KaneRaeburn KaneAylar önce
    • I should be outside putting brakes/rotors on my car.

      alwaysopenalwaysopenAylar önce
  • I'm gonna try to be nice, NOPE do not use the ould tank with just paint on it, not unless the inside is clean up and out also, tanks rust from the inside out. you can not fix problems inside the tank because people do not bleed of the water inside them you have made a ticking time bomb that the tank can burst on you break things or even worse kill you. Never reuse a old tank that is not certified safe. Its not worth the risk.

    bobbgbobbgAylar önce
  • Ну и какая нахуй это"реставрация" Где шлифовка коленвала? Где замена колец и шлифовка цениндра? Еде замена подшипников? Лайфакер сраный.... Помыл покрасил и пиздец... Убейся от шкаф сука!!!

    Игорь БрусникинИгорь БрусникинAylar önce
  • Не аккуратно , не профессионально . Откровенная совдепия. Печаль.

    Макс МаксимМакс МаксимAylar önce
  • Mài dẹp vậy.phun sơn 1 cái nửa thì ok hơn

    Tuat NguyenTuat NguyenAylar önce
  • Thấy cái nồi biết là hàng Việt Nam 😂

    Gió Vô TìnhGió Vô TìnhAylar önce
  • ** Amateur Work ** Ruined an old piece with a horrible restoration method.

    Guilherme HenriqueGuilherme HenriqueAylar önce
  • That tank should be scraped what ur doing is dangerous some1 will think the tank is new and then BANG

    WilliamWilliamAylar önce
  • Quel massacre 🤦🏻‍♂️

    Philou totoPhilou totoAylar önce
    • Thank you

      Restoration RestoreRestoration RestoreAylar önce
  • What kind of painting is that? My kid can do that

    Eric AdryantoEric AdryantoAylar önce
  • Your luck that there's not a button to avoid a channel.

    Yun Lai FaYun Lai FaAylar önce
  • Erstmal kompression messen?

    Marie JopkováMarie JopkováAylar önce
  • Eredeti színekkel is lefesthette volna,mert így nagyon monyák. :)

    Antal HorváthAntal HorváthAylar önce
  • Sowas lohn sich nicht reparieren.

    Marie JopkováMarie JopkováAylar önce
  • You have lost your mind.

    Richard MartinRichard MartinAylar önce
    • You can heart me if you like but I'm not talking about the paint job or rusty fasteners. You're pressurizing a pressure vessel that clearly has surface pitting on the outside. I can only imagine what the bottom of the inside of that tank looks like.

      Richard MartinRichard MartinAylar önce
  • Pelo visto não tem nenhum brasileiro aqui😰.gostei aí para vc muito bom o vídeo

    RC TUTORIAIS PLUSRC TUTORIAIS PLUSAylar önce
    • Thank you for watching the video

      Restoration RestoreRestoration RestoreAylar önce
  • Kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkklkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk

    Pedro HenrriquePedro HenrriqueAylar önce
  • That’s how women pee

    Susil SahooSusil SahooAylar önce
  • Lmao dumbass. Even if it has 1 spec of rust you havent sanded off the rust will come back and eat the metal again. There was tons of rust still all over that tank and if it was that rusty outside imagine inside. Pressurized rusty tank, What could go wrong?

    SteveSteveAylar önce
  • Buen video saludos desde Ecuador 🇪🇨🇪🇨🇪🇨

    AndresminAndresminAylar önce
  • Специально его так солью натер!обманщик

    Илья ЛевашовИлья ЛевашовAylar önce
  • Genial 👍🏽👍🏽👍🏽

    Víctor Condorcallo navarroVíctor Condorcallo navarroAylar önce
  • 1 million 800,000 views of someone remanufacturing a bomb. Glad to see that the receiver was thoroughly inspected and pressure tested.

    Ed CoombsEd CoombsAylar önce
    • Thanks for your comments. We thoroughly checked the air compressor after the video. It guarantees all safety parameters . Thank you

      Restoration RestoreRestoration RestoreAylar önce
Restoration rusty old air compressor | Restore vintage air compressor